"PolySetCache hit:" errors

classic Classic list List threaded Threaded
4 messages Options
Reply | Threaded
Open this post in threaded view
|

"PolySetCache hit:" errors

H P Ladds
I receive a slew of "PolySetCache hit:"  errors. Seems to originate from this bit of code (below) that creates a representation of a 2" by 2" by x" piece of steel square tube. I'm using steel square tubing as framing for a machine I plan to build. (JPEG of machine here: https://docs.google.com/file/d/0Bz6ELo6H8KYUVFdzaWxJZExMSkk/edit?usp=sharing.) 

I repeatedly use this module, so during F4 compile I receive many of these error messages; however, I see no detrimental effects resulting from the error. The drawing appear to render perfectly.  Thanks...

module x_tube (x) {
difference (){
                color ("SlateGray",  1)
        minkowski() {
translate ([0,   .25,  1.75])
rotate ([0,   90,   0])
cube (size = [1.5,  1.5,  x], center = false);
rotate ([0,   90,   0])
cylinder(h = .00001, r = .25, $fn=50, center = false); 
}
translate ([-.01, .25, 1.75])
rotate ([0,   90,   0])
cube (size = [1.5, 1.5, (x +.02)], center = false);
}
  
}
x_tube (70);

_______________________________________________
OpenSCAD mailing list
[hidden email]
http://rocklinux.net/mailman/listinfo/openscad
http://openscad.org - https://flattr.com/thing/121566
Reply | Threaded
Open this post in threaded view
|

Re: "PolySetCache hit:" errors

Drew Rogge
I just tried this on the 2013.01.10 linux version and didn't get any errors. What version are you using?

Drew

On 04/05/2013 08:50 AM, H P Ladds wrote:

> I receive a slew of "PolySetCache hit:"  errors. Seems to originate from this bit of code (below) that creates a representation of a 2" by 2" by x" piece of steel square tube. I'm using steel square tubing as framing for a machine I plan to build. (JPEG of machine here: https://docs.google.com/file/d/0Bz6ELo6H8KYUVFdzaWxJZExMSkk/edit?usp=sharing <http://docs.google.com/file/d/0Bz6ELo6H8KYUVFdzaWxJZExMSkk/edit?usp=sharing>.)
>
> I repeatedly use this module, so during F4 compile I receive many of these error messages; however, I see no detrimental effects resulting from the error. The drawing appear to render perfectly.  Thanks...
>
> module x_tube (x) {
> difference (){
>                  color ("SlateGray",  1)
>          minkowski() {
> translate ([0,   .25,  1.75])
> rotate ([0,   90,   0])
> cube (size = [1.5,  1.5,  x], center = false);
> rotate ([0,   90,   0])
> cylinder(h = .00001, r = .25, $fn=50, center = false);
> }
> translate ([-.01, .25, 1.75])
> rotate ([0,   90,   0])
> cube (size = [1.5, 1.5, (x +.02)], center = false);
> }
> }
> x_tube (70);
>
>
> _______________________________________________
> OpenSCAD mailing list
> [hidden email]
> http://rocklinux.net/mailman/listinfo/openscad
> http://openscad.org - https://flattr.com/thing/121566
_______________________________________________
OpenSCAD mailing list
[hidden email]
http://rocklinux.net/mailman/listinfo/openscad
http://openscad.org - https://flattr.com/thing/121566
Reply | Threaded
Open this post in threaded view
|

Re: "PolySetCache hit:" errors

H P Ladds



On Fri, Apr 5, 2013 at 11:57 AM, Drew Rogge <[hidden email]> wrote:
I just tried this on the 2013.01.10 linux version and didn't get any errors. What version are you using?


OpenSCAD version 2013.02.28

From what I'm learning, this is not a error message. Somehow I slipped into some "debug" version of the software.  

 

_______________________________________________
OpenSCAD mailing list
[hidden email]
http://rocklinux.net/mailman/listinfo/openscad
http://openscad.org - https://flattr.com/thing/121566
Reply | Threaded
Open this post in threaded view
|

Re: "PolySetCache hit:" errors

kintel
Administrator
On 2013-04-05, at 12:15 , H P Ladds wrote:
>
> From what I'm learning, this is not a error message. Somehow I slipped into some "debug" version of the software.  
>
Yes, the PPA build are apparently debug builds. I've contacted chrysn about it to clarify if this is done on purpose or not.

 -Marius

_______________________________________________
OpenSCAD mailing list
[hidden email]
http://rocklinux.net/mailman/listinfo/openscad
http://openscad.org - https://flattr.com/thing/121566