lol - Tutorial: Using OpenSCAD To Make Your Wife Happy

classic Classic list List threaded Threaded
8 messages Options
Reply | Threaded
Open this post in threaded view
|

lol - Tutorial: Using OpenSCAD To Make Your Wife Happy

MichaelAtOz
Administrator
Youtube Tutorial: Using OpenSCAD To Make Your Wife Happy

Perhaps we should start a list of relevant videos in the wiki???
Admin - PM me if you need anything,
or if I've done something stupid...

Unless specifically shown otherwise above, my contribution is in the Public Domain; to the extent possible under law, I have waived all copyright and related or neighbouring rights to this work.
Obviously inclusion of works of previous authors is not included in the above.


The TPP is no simple “trade agreement.” Fight it! http://www.ourfairdeal.org/ time is running out!
Reply | Threaded
Open this post in threaded view
|

Re: lol - Tutorial: Using OpenSCAD To Make Your Wife Happy

nophead
Ha, I also hung a whiteboard for my wife using OpenSCAD and a 3D printer. I glued printed hooks to the wall with no more nails, so they are invisible when the board is hung on them.

Inline images 4

Also a rack to hold the pens underneath.

Inline images 5

On 26 May 2017 at 23:17, MichaelAtOz <[hidden email]> wrote:
Youtube  Tutorial: Using OpenSCAD To Make Your Wife Happy
<https://www.youtube.com/watch?v=5S-md4K2h-0>

Perhaps we should start a list of relevant videos in the wiki???



-----
Admin - PM me if you need anything, or if I've done something stupid...

Unless specifically shown otherwise above, my contribution is in the Public Domain; to the extent possible under law, I have waived all copyright and related or neighbouring rights to this work. Obviously inclusion of works of previous authors is not included in the above.

The TPP is no simple “trade agreement.”   Fight it! http://www.ourfairdeal.org/   time is running out!
--
View this message in context: http://forum.openscad.org/lol-Tutorial-Using-OpenSCAD-To-Make-Your-Wife-Happy-tp21578.html
Sent from the OpenSCAD mailing list archive at Nabble.com.

_______________________________________________
OpenSCAD mailing list
[hidden email]
http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org


_______________________________________________
OpenSCAD mailing list
[hidden email]
http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org
Reply | Threaded
Open this post in threaded view
|

Re: lol - Tutorial: Using OpenSCAD To Make Your Wife Happy

RobWLakes

My effort was repairing a broken, favourite pepper grinder. One of my most pleasing projects, small, almost unnoticed, but very effective.

Thanks to OpenSCAD, I got it right in one go. Rob

https://www.thingiverse.com/thing:2305594

On 27/05/17 19:27, nop head wrote:
Ha, I also hung a whiteboard for my wife using OpenSCAD and a 3D printer. I glued printed hooks to the wall with no more nails, so they are invisible when the board is hung on them.

Also a rack to hold the pens underneath.

On 26 May 2017 at 23:17, MichaelAtOz <[hidden email]> wrote:
Youtube  Tutorial: Using OpenSCAD To Make Your Wife Happy
<https://www.youtube.com/watch?v=5S-md4K2h-0>

Perhaps we should start a list of relevant videos in the wiki???


_______________________________________________
OpenSCAD mailing list
[hidden email]
http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org
Rob W
Lake Tyers Beach,
Victoria, Australia
Reply | Threaded
Open this post in threaded view
|

Re: lol - Tutorial: Using OpenSCAD To Make Your Wife Happy

spinorkit
A wheel broke off the vacuum cleaner. I designed (in OpenSCAD) and printed (in abs) this simple but effective fix in about 30 minutes total, while she was out shopping.





On Sun, May 28, 2017 at 12:34 PM, Rob Ward <[hidden email]> wrote:

My effort was repairing a broken, favourite pepper grinder. One of my most pleasing projects, small, almost unnoticed, but very effective.

Thanks to OpenSCAD, I got it right in one go. Rob

https://www.thingiverse.com/thing:2305594

On 27/05/17 19:27, nop head wrote:
Ha, I also hung a whiteboard for my wife using OpenSCAD and a 3D printer. I glued printed hooks to the wall with no more nails, so they are invisible when the board is hung on them.

Also a rack to hold the pens underneath.

On 26 May 2017 at 23:17, MichaelAtOz <[hidden email]> wrote:
Youtube  Tutorial: Using OpenSCAD To Make Your Wife Happy
<https://www.youtube.com/watch?v=5S-md4K2h-0>

Perhaps we should start a list of relevant videos in the wiki???


_______________________________________________
OpenSCAD mailing list
[hidden email]
http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org



_______________________________________________
OpenSCAD mailing list
[hidden email]
http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org
Reply | Threaded
Open this post in threaded view
|

Re: lol - Tutorial: Using OpenSCAD To Make Your Wife Happy

cacb
In reply to this post by RobWLakes
On 28. mai 2017 02:34, Rob Ward wrote:
 > My effort was repairing a broken, favourite pepper grinder. One of my
 > most pleasing projects, small, almost unnoticed, but very effective.

That is very nice indeed! 3d printing works very well for such custom
repairs, otherwise impossible. I really like the idea of your fathers
"never throw anything out that he had not repaired at least twice
before". Well done.

I am now printing an "ant blocker", which is just a funny name for a
custom lid on a septic tank access pipe. Looks like the ants found a way
to our bathroom, but this I hope will cure that problem and make my wife
happy as well :-)

Carsten Arnholm

_______________________________________________
OpenSCAD mailing list
[hidden email]
http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org
Reply | Threaded
Open this post in threaded view
|

Re: lol - Tutorial: Using OpenSCAD To Make Your Wife Happy

codifies
In reply to this post by spinorkit
You do realise you've made a rod for your own back now "she" will expect any gadget or repair whipped up in moments!

My suggestion.... teach her about OpenSCAD and explain ALL the limitations of 3d printing - in exhaustive detail .... eventually she'll get bored and think twice before expecting some instantly created star trek replicator produced widget

;) of course never forget nice (well selected) dust gathers ornaments can be generators of brownie points!

On 28/05/17 05:39, Kit Adams wrote:
A wheel broke off the vacuum cleaner. I designed (in OpenSCAD) and printed (in abs) this simple but effective fix in about 30 minutes total, while she was out shopping.





On Sun, May 28, 2017 at 12:34 PM, Rob Ward <[hidden email]> wrote:

My effort was repairing a broken, favourite pepper grinder. One of my most pleasing projects, small, almost unnoticed, but very effective.

Thanks to OpenSCAD, I got it right in one go. Rob

https://www.thingiverse.com/thing:2305594

On 27/05/17 19:27, nop head wrote:
Ha, I also hung a whiteboard for my wife using OpenSCAD and a 3D printer. I glued printed hooks to the wall with no more nails, so they are invisible when the board is hung on them.

Also a rack to hold the pens underneath.

On 26 May 2017 at 23:17, MichaelAtOz <[hidden email]> wrote:
Youtube  Tutorial: Using OpenSCAD To Make Your Wife Happy
<https://www.youtube.com/watch?v=5S-md4K2h-0>

Perhaps we should start a list of relevant videos in the wiki???


_______________________________________________
OpenSCAD mailing list
[hidden email]
http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org




_______________________________________________
OpenSCAD mailing list
[hidden email]
http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org


_______________________________________________
OpenSCAD mailing list
[hidden email]
http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org
Reply | Threaded
Open this post in threaded view
|

Re: lol - Tutorial: Using OpenSCAD To Make Your Wife Happy

frankv
And garden gnomes!

On 30/05/2017 9:43 AM, "Mr C Camacho" <[hidden email]> wrote:
You do realise you've made a rod for your own back now "she" will expect any gadget or repair whipped up in moments!

My suggestion.... teach her about OpenSCAD and explain ALL the limitations of 3d printing - in exhaustive detail .... eventually she'll get bored and think twice before expecting some instantly created star trek replicator produced widget

;) of course never forget nice (well selected) dust gathers ornaments can be generators of brownie points!

On 28/05/17 05:39, Kit Adams wrote:
A wheel broke off the vacuum cleaner. I designed (in OpenSCAD) and printed (in abs) this simple but effective fix in about 30 minutes total, while she was out shopping.





On Sun, May 28, 2017 at 12:34 PM, Rob Ward <[hidden email]> wrote:

My effort was repairing a broken, favourite pepper grinder. One of my most pleasing projects, small, almost unnoticed, but very effective.

Thanks to OpenSCAD, I got it right in one go. Rob

https://www.thingiverse.com/thing:2305594

On 27/05/17 19:27, nop head wrote:
Ha, I also hung a whiteboard for my wife using OpenSCAD and a 3D printer. I glued printed hooks to the wall with no more nails, so they are invisible when the board is hung on them.

Also a rack to hold the pens underneath.

On 26 May 2017 at 23:17, MichaelAtOz <[hidden email]> wrote:
Youtube  Tutorial: Using OpenSCAD To Make Your Wife Happy
<https://www.youtube.com/watch?v=5S-md4K2h-0>

Perhaps we should start a list of relevant videos in the wiki???


_______________________________________________
OpenSCAD mailing list
[hidden email]
http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org




_______________________________________________
OpenSCAD mailing list
[hidden email]
http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org


_______________________________________________
OpenSCAD mailing list
[hidden email]
http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org


_______________________________________________
OpenSCAD mailing list
[hidden email]
http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org
Reply | Threaded
Open this post in threaded view
|

Re: lol - Tutorial: Using OpenSCAD To Make Your Wife Happy

MichaelAtOz
Administrator
Could people please trim the old photos from their quotes when replying, they keep getting flagged as oversize.
Admin - PM me if you need anything,
or if I've done something stupid...

Unless specifically shown otherwise above, my contribution is in the Public Domain; to the extent possible under law, I have waived all copyright and related or neighbouring rights to this work.
Obviously inclusion of works of previous authors is not included in the above.


The TPP is no simple “trade agreement.” Fight it! http://www.ourfairdeal.org/ time is running out!