OpenSCAD on Debian

classic Classic list List threaded Threaded
22 messages Options
12
Reply | Threaded
Open this post in threaded view
|

OpenSCAD on Debian

MichaelAtOz
Administrator
I'm playing with Linux again.
Got Debian Stretch installed and using it to RDP into my Windows VM until I
transition.
It's a bit flaky ATM but that may be my RAID1 NVME 'creative' solution...

Anyway, Synaptic installs OpenSCAD 2015.03.

Can I have multiple versions installed like on Windows (via zip)?
How do I get the 2019.05 release?

I take it if I follow the instructions re "openscad-nightly", that can
co-exist.



-----
Admin - email* me if you need anything, or if I've done something stupid...

* click on my MichaelAtOz label, there is a link to email me.

Unless specifically shown otherwise above, my contribution is in the Public Domain; to the extent possible under law, I have waived all copyright and related or neighbouring rights to this work. Obviously inclusion of works of previous authors is not included in the above.

The TPP is no simple “trade agreement.”   Fight it! http://www.ourfairdeal.org/   time is running out!
--
Sent from: http://forum.openscad.org/

_______________________________________________
OpenSCAD mailing list
[hidden email]
http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org
Admin - email* me if you need anything,
or if I've done something stupid...
* click on my MichaelAtOz label, there is a link to email me.

Unless specifically shown otherwise above, my contribution is in the Public Domain; to the extent possible under law, I have waived all copyright and related or neighbouring rights to this work.
Obviously inclusion of works of previous authors is not included in the above.


The TPP is no simple “trade agreement.” Fight it! http://www.ourfairdeal.org/ time is running out!
tp3
Reply | Threaded
Open this post in threaded view
|

Re: OpenSCAD on Debian

tp3
On 30.06.19 08:27, MichaelAtOz wrote:
> Can I have multiple versions installed like on Windows (via zip)?
> How do I get the 2019.05 release?
>
> I take it if I follow the instructions re "openscad-nightly", that can
> co-exist.

Yes, the nightlies are packaged to go into separate folders so they
can installed in parallel.

ciao,
  Torsten.

_______________________________________________
OpenSCAD mailing list
[hidden email]
http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org
-- Torsten
Reply | Threaded
Open this post in threaded view
|

Re: OpenSCAD on Debian

MichaelAtOz
Administrator
In reply to this post by MichaelAtOz
More Linux adoption issues.
What's going on here? 'Can't open library...'
<http://forum.openscad.org/file/t359/Screenshot_use_error.png>
The source file is in ~/openscad which also contains the library folders
'use<>'ed in the source.
It finds the first two, what's different with 'scad-utils'?
2015.03 if that matters.



-----
Admin - email* me if you need anything, or if I've done something stupid...

* click on my MichaelAtOz label, there is a link to email me.

Unless specifically shown otherwise above, my contribution is in the Public Domain; to the extent possible under law, I have waived all copyright and related or neighbouring rights to this work. Obviously inclusion of works of previous authors is not included in the above.

The TPP is no simple “trade agreement.”   Fight it! http://www.ourfairdeal.org/   time is running out!
--
Sent from: http://forum.openscad.org/

_______________________________________________
OpenSCAD mailing list
[hidden email]
http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org
Admin - email* me if you need anything,
or if I've done something stupid...
* click on my MichaelAtOz label, there is a link to email me.

Unless specifically shown otherwise above, my contribution is in the Public Domain; to the extent possible under law, I have waived all copyright and related or neighbouring rights to this work.
Obviously inclusion of works of previous authors is not included in the above.


The TPP is no simple “trade agreement.” Fight it! http://www.ourfairdeal.org/ time is running out!
Reply | Threaded
Open this post in threaded view
|

Re: OpenSCAD on Debian

MichaelAtOz
Administrator
ahh, it was use<> inside skin.scad.
Must setup library folder...



-----
Admin - email* me if you need anything, or if I've done something stupid...

* click on my MichaelAtOz label, there is a link to email me.

Unless specifically shown otherwise above, my contribution is in the Public Domain; to the extent possible under law, I have waived all copyright and related or neighbouring rights to this work. Obviously inclusion of works of previous authors is not included in the above.

The TPP is no simple “trade agreement.”   Fight it! http://www.ourfairdeal.org/   time is running out!
--
Sent from: http://forum.openscad.org/

_______________________________________________
OpenSCAD mailing list
[hidden email]
http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org
Admin - email* me if you need anything,
or if I've done something stupid...
* click on my MichaelAtOz label, there is a link to email me.

Unless specifically shown otherwise above, my contribution is in the Public Domain; to the extent possible under law, I have waived all copyright and related or neighbouring rights to this work.
Obviously inclusion of works of previous authors is not included in the above.


The TPP is no simple “trade agreement.” Fight it! http://www.ourfairdeal.org/ time is running out!
Reply | Threaded
Open this post in threaded view
|

Re: OpenSCAD on Debian

MichaelAtOz
Administrator
Next step - openscad-nightly


> Debian / Ubuntu packages built on OpenSUSE build service
>
> To install the packages, the release key must be added with apt-key to the
> key-ring to allow apt-get / aptitude to validate the packages.
> Key ID: 75F3214F30EB8E08 (valid till 2021-04-18)
> Key UID: home:t-paul OBS Project
> &lt;
> home:[hidden email]
> &gt;

Well apt-key help is not particularly helpful.
So how does a Debian beginner do this?

I tried 'wget -qO - https://files.openscad.org/OBS-Repository-Key.pub | sudo
apt-key add -'

gpg: WARNING: nothing exported
gpg: no valid OpenPGP data found.
gpg: Total number processed: 0




-----
Admin - email* me if you need anything, or if I've done something stupid...

* click on my MichaelAtOz label, there is a link to email me.

Unless specifically shown otherwise above, my contribution is in the Public Domain; to the extent possible under law, I have waived all copyright and related or neighbouring rights to this work. Obviously inclusion of works of previous authors is not included in the above.

The TPP is no simple “trade agreement.”   Fight it! http://www.ourfairdeal.org/   time is running out!
--
Sent from: http://forum.openscad.org/

_______________________________________________
OpenSCAD mailing list
[hidden email]
http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org
Admin - email* me if you need anything,
or if I've done something stupid...
* click on my MichaelAtOz label, there is a link to email me.

Unless specifically shown otherwise above, my contribution is in the Public Domain; to the extent possible under law, I have waived all copyright and related or neighbouring rights to this work.
Obviously inclusion of works of previous authors is not included in the above.


The TPP is no simple “trade agreement.” Fight it! http://www.ourfairdeal.org/ time is running out!
tp3
Reply | Threaded
Open this post in threaded view
|

Re: OpenSCAD on Debian

tp3
On 15.07.19 09:03, MichaelAtOz wrote:
> I tried 'wget -qO - https://files.openscad.org/OBS-Repository-Key.pub | sudo
> apt-key add -'
>
> gpg: WARNING: nothing exported
> gpg: no valid OpenPGP data found.
> gpg: Total number processed: 0

I've never seen that fail really, I suspect that maybe wget is
just not installed?

Does it work separately?

wget https://files.openscad.org/OBS-Repository-Key.pub
apt-key add OBS-Repository-Key.pub

ciao,
  Torsten.

_______________________________________________
OpenSCAD mailing list
[hidden email]
http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org
-- Torsten
Reply | Threaded
Open this post in threaded view
|

Re: OpenSCAD on Debian

leebc
Try it as:
        sudo ls
then wget -qO - https://files.openscad.org/OBS-Repository-Key.pub | sudo apt-key add -


I have had problems before because sudo needs you to authenticate, but piping
into sudo redirects stdin and stdout, making authentication impossible.


Thus Torsten Paul hast written on Mon, Jul 15, 2019 at 08:48:08PM +0200, and, according to prophecy, it shall come to pass that:

> On 15.07.19 09:03, MichaelAtOz wrote:
> > I tried 'wget -qO - https://files.openscad.org/OBS-Repository-Key.pub | sudo
> > apt-key add -'
> >
> > gpg: WARNING: nothing exported
> > gpg: no valid OpenPGP data found.
> > gpg: Total number processed: 0
>
> I've never seen that fail really, I suspect that maybe wget is
> just not installed?
>
> Does it work separately?
>
> wget https://files.openscad.org/OBS-Repository-Key.pub
> apt-key add OBS-Repository-Key.pub

_______________________________________________
OpenSCAD mailing list
[hidden email]
http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org
Reply | Threaded
Open this post in threaded view
|

Re: OpenSCAD on Debian

acwest
This is where 'sudo bash' is your friend... 

On Mon, 15 Jul 2019, 15:05 Bryan Lee, <[hidden email]> wrote:
Try it as:
        sudo ls
then    wget -qO - https://files.openscad.org/OBS-Repository-Key.pub | sudo apt-key add -


I have had problems before because sudo needs you to authenticate, but piping
into sudo redirects stdin and stdout, making authentication impossible.


Thus Torsten Paul hast written on Mon, Jul 15, 2019 at 08:48:08PM +0200, and, according to prophecy, it shall come to pass that:
> On 15.07.19 09:03, MichaelAtOz wrote:
> > I tried 'wget -qO - https://files.openscad.org/OBS-Repository-Key.pub | sudo
> > apt-key add -'
> >
> > gpg: WARNING: nothing exported
> > gpg: no valid OpenPGP data found.
> > gpg: Total number processed: 0
>
> I've never seen that fail really, I suspect that maybe wget is
> just not installed?
>
> Does it work separately?
>
> wget https://files.openscad.org/OBS-Repository-Key.pub
> apt-key add OBS-Repository-Key.pub

_______________________________________________
OpenSCAD mailing list
[hidden email]
http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org

_______________________________________________
OpenSCAD mailing list
[hidden email]
http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org
Reply | Threaded
Open this post in threaded view
|

Re: OpenSCAD on Debian

leebc
Yeah.. Don't....   Dont' do it like that.   That makes the privledge
seperation pointless and you may as well run everything as root.

Thus A. Craig West hast written on Mon, Jul 15, 2019 at 03:11:23PM -0400, and, according to prophecy, it shall come to pass that:

> This is where 'sudo bash' is your friend...
>
> On Mon, 15 Jul 2019, 15:05 Bryan Lee, <[hidden email]> wrote:
>
> > Try it as:
> >         sudo ls
> > then    wget -qO - https://files.openscad.org/OBS-Repository-Key.pub |
> > sudo apt-key add -
> >
> >
> > I have had problems before because sudo needs you to authenticate, but
> > piping
> > into sudo redirects stdin and stdout, making authentication impossible.
> >
> >
> > Thus Torsten Paul hast written on Mon, Jul 15, 2019 at 08:48:08PM +0200,
> > and, according to prophecy, it shall come to pass that:
> > > On 15.07.19 09:03, MichaelAtOz wrote:
> > > > I tried 'wget -qO - https://files.openscad.org/OBS-Repository-Key.pub
> > | sudo
> > > > apt-key add -'
> > > >
> > > > gpg: WARNING: nothing exported
> > > > gpg: no valid OpenPGP data found.
> > > > gpg: Total number processed: 0
> > >
> > > I've never seen that fail really, I suspect that maybe wget is
> > > just not installed?
> > >
> > > Does it work separately?
> > >
> > > wget https://files.openscad.org/OBS-Repository-Key.pub
> > > apt-key add OBS-Repository-Key.pub
> >
> > _______________________________________________
> > OpenSCAD mailing list
> > [hidden email]
> > http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org
> >

> _______________________________________________
> OpenSCAD mailing list
> [hidden email]
> http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org


_______________________________________________
OpenSCAD mailing list
[hidden email]
http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org
Reply | Threaded
Open this post in threaded view
|

Re: OpenSCAD on Debian

acwest
When you are doing system management tasks that all need to be performed as root, it's pretty pointless to sudo each particular command. When i am doing this type of thing, I either run commands that don't need root in a different prompt, or su them to the user

On Mon, 15 Jul 2019, 15:38 Bryan Lee, <[hidden email]> wrote:
Yeah.. Don't....   Dont' do it like that.   That makes the privledge
seperation pointless and you may as well run everything as root.

Thus A. Craig West hast written on Mon, Jul 15, 2019 at 03:11:23PM -0400, and, according to prophecy, it shall come to pass that:
> This is where 'sudo bash' is your friend...
>
> On Mon, 15 Jul 2019, 15:05 Bryan Lee, <[hidden email]> wrote:
>
> > Try it as:
> >         sudo ls
> > then    wget -qO - https://files.openscad.org/OBS-Repository-Key.pub |
> > sudo apt-key add -
> >
> >
> > I have had problems before because sudo needs you to authenticate, but
> > piping
> > into sudo redirects stdin and stdout, making authentication impossible.
> >
> >
> > Thus Torsten Paul hast written on Mon, Jul 15, 2019 at 08:48:08PM +0200,
> > and, according to prophecy, it shall come to pass that:
> > > On 15.07.19 09:03, MichaelAtOz wrote:
> > > > I tried 'wget -qO - https://files.openscad.org/OBS-Repository-Key.pub
> > | sudo
> > > > apt-key add -'
> > > >
> > > > gpg: WARNING: nothing exported
> > > > gpg: no valid OpenPGP data found.
> > > > gpg: Total number processed: 0
> > >
> > > I've never seen that fail really, I suspect that maybe wget is
> > > just not installed?
> > >
> > > Does it work separately?
> > >
> > > wget https://files.openscad.org/OBS-Repository-Key.pub
> > > apt-key add OBS-Repository-Key.pub
> >
> > _______________________________________________
> > OpenSCAD mailing list
> > [hidden email]
> > http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org
> >

> _______________________________________________
> OpenSCAD mailing list
> [hidden email]
> http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org


_______________________________________________
OpenSCAD mailing list
[hidden email]
http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org

_______________________________________________
OpenSCAD mailing list
[hidden email]
http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org
Reply | Threaded
Open this post in threaded view
|

Re: OpenSCAD on Debian

nophead
In reply to this post by leebc
Yes we used to be able to do su root, before unix became a nany like thieving else these days.

On Mon, 15 Jul 2019 at 20:38, Bryan Lee <[hidden email]> wrote:
Yeah.. Don't....   Dont' do it like that.   That makes the privledge
seperation pointless and you may as well run everything as root.

Thus A. Craig West hast written on Mon, Jul 15, 2019 at 03:11:23PM -0400, and, according to prophecy, it shall come to pass that:
> This is where 'sudo bash' is your friend...
>
> On Mon, 15 Jul 2019, 15:05 Bryan Lee, <[hidden email]> wrote:
>
> > Try it as:
> >         sudo ls
> > then    wget -qO - https://files.openscad.org/OBS-Repository-Key.pub |
> > sudo apt-key add -
> >
> >
> > I have had problems before because sudo needs you to authenticate, but
> > piping
> > into sudo redirects stdin and stdout, making authentication impossible.
> >
> >
> > Thus Torsten Paul hast written on Mon, Jul 15, 2019 at 08:48:08PM +0200,
> > and, according to prophecy, it shall come to pass that:
> > > On 15.07.19 09:03, MichaelAtOz wrote:
> > > > I tried 'wget -qO - https://files.openscad.org/OBS-Repository-Key.pub
> > | sudo
> > > > apt-key add -'
> > > >
> > > > gpg: WARNING: nothing exported
> > > > gpg: no valid OpenPGP data found.
> > > > gpg: Total number processed: 0
> > >
> > > I've never seen that fail really, I suspect that maybe wget is
> > > just not installed?
> > >
> > > Does it work separately?
> > >
> > > wget https://files.openscad.org/OBS-Repository-Key.pub
> > > apt-key add OBS-Repository-Key.pub
> >
> > _______________________________________________
> > OpenSCAD mailing list
> > [hidden email]
> > http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org
> >

> _______________________________________________
> OpenSCAD mailing list
> [hidden email]
> http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org


_______________________________________________
OpenSCAD mailing list
[hidden email]
http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org

_______________________________________________
OpenSCAD mailing list
[hidden email]
http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org
Reply | Threaded
Open this post in threaded view
|

Re: OpenSCAD on Debian

acwest
I mean sudo bash, if you are doing a lot of root tasks, and then if one of the tasks doesn't need root, su -c "do unprivileged command" username


On Mon, 15 Jul 2019, 15:43 nop head, <[hidden email]> wrote:
Yes we used to be able to do su root, before unix became a nany like thieving else these days.

On Mon, 15 Jul 2019 at 20:38, Bryan Lee <[hidden email]> wrote:
Yeah.. Don't....   Dont' do it like that.   That makes the privledge
seperation pointless and you may as well run everything as root.

Thus A. Craig West hast written on Mon, Jul 15, 2019 at 03:11:23PM -0400, and, according to prophecy, it shall come to pass that:
> This is where 'sudo bash' is your friend...
>
> On Mon, 15 Jul 2019, 15:05 Bryan Lee, <[hidden email]> wrote:
>
> > Try it as:
> >         sudo ls
> > then    wget -qO - https://files.openscad.org/OBS-Repository-Key.pub |
> > sudo apt-key add -
> >
> >
> > I have had problems before because sudo needs you to authenticate, but
> > piping
> > into sudo redirects stdin and stdout, making authentication impossible.
> >
> >
> > Thus Torsten Paul hast written on Mon, Jul 15, 2019 at 08:48:08PM +0200,
> > and, according to prophecy, it shall come to pass that:
> > > On 15.07.19 09:03, MichaelAtOz wrote:
> > > > I tried 'wget -qO - https://files.openscad.org/OBS-Repository-Key.pub
> > | sudo
> > > > apt-key add -'
> > > >
> > > > gpg: WARNING: nothing exported
> > > > gpg: no valid OpenPGP data found.
> > > > gpg: Total number processed: 0
> > >
> > > I've never seen that fail really, I suspect that maybe wget is
> > > just not installed?
> > >
> > > Does it work separately?
> > >
> > > wget https://files.openscad.org/OBS-Repository-Key.pub
> > > apt-key add OBS-Repository-Key.pub
> >
> > _______________________________________________
> > OpenSCAD mailing list
> > [hidden email]
> > http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org
> >

> _______________________________________________
> OpenSCAD mailing list
> [hidden email]
> http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org


_______________________________________________
OpenSCAD mailing list
[hidden email]
http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org
_______________________________________________
OpenSCAD mailing list
[hidden email]
http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org

_______________________________________________
OpenSCAD mailing list
[hidden email]
http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org
Reply | Threaded
Open this post in threaded view
|

Re: OpenSCAD on Debian

MichaelAtOz
Administrator
In reply to this post by tp3
0
tp3 wrote
> Does it work separately?

I'm currently sudo with ALL=(ALL) NOPASSWD:ALL so it isn't password
related.(Yes I know...)

*mebd@mebd:~$ wget https://files.openscad.org/OBS-Repository-Key.pub*
--2019-07-16 09:02:56--  https://files.openscad.org/OBS-Repository-Key.pub
Resolving files.openscad.org (files.openscad.org)... 104.236.249.91
Connecting to files.openscad.org (files.openscad.org)|104.236.249.91|:443...
connected.
HTTP request sent, awaiting response... 200 OK
Length: 1093 (1.1K) [application/octet-stream]
Saving to: ‘OBS-Repository-Key.pub’

OBS-Repository-Key.pub          
100%[=============================================================>]   1.07K
--.-KB/s    in 0s      

2019-07-16 09:02:57 (14.8 MB/s) - ‘OBS-Repository-Key.pub’ saved [1093/1093]

*mebd@mebd:~$ sudo apt-key add OBS-Repository-Key.pub*
gpg: WARNING: nothing exported
gpg: no valid OpenPGP data found.
gpg: Total number processed: 0
*mebd@mebd:~$ cat OBS-Repository-Key.pub*
-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: GnuPG v1.4.5 (GNU/Linux)
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=KL4Z
-----END PGP PUBLIC KEY BLOCK-----
mebd@mebd:~$




-----
Admin - email* me if you need anything, or if I've done something stupid...

* click on my MichaelAtOz label, there is a link to email me.

Unless specifically shown otherwise above, my contribution is in the Public Domain; to the extent possible under law, I have waived all copyright and related or neighbouring rights to this work. Obviously inclusion of works of previous authors is not included in the above.

The TPP is no simple “trade agreement.”   Fight it! http://www.ourfairdeal.org/   time is running out!
--
Sent from: http://forum.openscad.org/

_______________________________________________
OpenSCAD mailing list
[hidden email]
http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org
Admin - email* me if you need anything,
or if I've done something stupid...
* click on my MichaelAtOz label, there is a link to email me.

Unless specifically shown otherwise above, my contribution is in the Public Domain; to the extent possible under law, I have waived all copyright and related or neighbouring rights to this work.
Obviously inclusion of works of previous authors is not included in the above.


The TPP is no simple “trade agreement.” Fight it! http://www.ourfairdeal.org/ time is running out!
Reply | Threaded
Open this post in threaded view
|

Re: OpenSCAD on Debian

MichaelAtOz
Administrator
Note, this is the bit I need help with, am I meant to do something with gpg?
(Google is not my friend ATM)


added with apt-key to the key-ring to allow apt-get / aptitude to validate
the packages.
Key ID: 75F3214F30EB8E08 (valid till 2021-04-18)
Key UID: home:t-paul OBS Project <home:[hidden email]>





-----
Admin - email* me if you need anything, or if I've done something stupid...

* click on my MichaelAtOz label, there is a link to email me.

Unless specifically shown otherwise above, my contribution is in the Public Domain; to the extent possible under law, I have waived all copyright and related or neighbouring rights to this work. Obviously inclusion of works of previous authors is not included in the above.

The TPP is no simple “trade agreement.”   Fight it! http://www.ourfairdeal.org/   time is running out!
--
Sent from: http://forum.openscad.org/

_______________________________________________
OpenSCAD mailing list
[hidden email]
http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org
Admin - email* me if you need anything,
or if I've done something stupid...
* click on my MichaelAtOz label, there is a link to email me.

Unless specifically shown otherwise above, my contribution is in the Public Domain; to the extent possible under law, I have waived all copyright and related or neighbouring rights to this work.
Obviously inclusion of works of previous authors is not included in the above.


The TPP is no simple “trade agreement.” Fight it! http://www.ourfairdeal.org/ time is running out!
tp3
Reply | Threaded
Open this post in threaded view
|

Re: OpenSCAD on Debian

tp3
In reply to this post by MichaelAtOz
On 16.07.19 01:17, MichaelAtOz wrote:
> *mebd@mebd:~$ sudo apt-key add OBS-Repository-Key.pub*
> gpg: WARNING: nothing exported
> gpg: no valid OpenPGP data found.
> gpg: Total number processed: 0

I found some references that could be caused by a corrupted
/etc/apt/trusted.gpg file.

What happens with

gpg --list-keys --no-default-keyring --keyring /etc/apt/trusted.gpg

That should list some keys in format

pub   rsa2048 2014-09-20 [SC] [expires: 2021-04-18]
      5F4A8A2C8BB11716F29482BB75F3214F30EB8E08
uid           [ unknown] home:t-paul OBS Project <home:[hidden email]>

If that gives an error maybe backup that file by renaming
it and retry with apt-key.

ciao,
  Torsten.

_______________________________________________
OpenSCAD mailing list
[hidden email]
http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org
-- Torsten
Reply | Threaded
Open this post in threaded view
|

Re: OpenSCAD on Debian

MichaelAtOz
Administrator
tp3 wrote
> If that gives an error maybe backup that file by renaming
> it and retry with apt-key.

That did it, thanks.

Now I need to resolve 30 odd dependencies...



-----
Admin - email* me if you need anything, or if I've done something stupid...

* click on my MichaelAtOz label, there is a link to email me.

Unless specifically shown otherwise above, my contribution is in the Public Domain; to the extent possible under law, I have waived all copyright and related or neighbouring rights to this work. Obviously inclusion of works of previous authors is not included in the above.

The TPP is no simple “trade agreement.”   Fight it! http://www.ourfairdeal.org/   time is running out!
--
Sent from: http://forum.openscad.org/

_______________________________________________
OpenSCAD mailing list
[hidden email]
http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org
Admin - email* me if you need anything,
or if I've done something stupid...
* click on my MichaelAtOz label, there is a link to email me.

Unless specifically shown otherwise above, my contribution is in the Public Domain; to the extent possible under law, I have waived all copyright and related or neighbouring rights to this work.
Obviously inclusion of works of previous authors is not included in the above.


The TPP is no simple “trade agreement.” Fight it! http://www.ourfairdeal.org/ time is running out!
Reply | Threaded
Open this post in threaded view
|

Re: OpenSCAD on Debian

MichaelAtOz
Administrator
I stopped checking after the first 7 were installed, so I presume it is
something else.

This was via Synaptic. Why not installable?

openscad-nightly:arm64: Installed version
 Depends: libboost-filesystem1.62.0  but it is not installable
1.62.0+dfsg-4
 Depends: libboost-program-options1.62.0  but it is not installable "
 Depends: libboost-regex1.62.0  but it is not installable "
 Depends: libboost-system1.62.0  but it is not installable "
 Depends: libboost-thread1.62.0  but it is not installable "
 Depends: libc6 (>=2.17) but it is not installable 2.24-11-deb94
 Depends: libcgal12  but it is not installable 4.9-1+b2
 Depends: libdouble-conversion1 (>=2.0.0) but it is not installable
 Depends: libfontconfig1 (>=2.11) but it is not installable
 Depends: libfreetype6 (>=2.2.1) but it is not installable
 Depends: libgcc1 (>=1:4.2) but it is not installable
 Depends: libgl1-mesa-glx  but it is not installable or
  libgl1  but it is not installable
 Depends: libglew2.0 (>=1.12.0) but it is not installable
 Depends: libglib2.0-0 (>=2.12.0) but it is not installable
 Depends: libglu1-mesa  but it is not installable or
  libglu1  but it is not installable
 Depends: libgmp10  but it is not installable
 Depends: libharfbuzz0b (>=0.9.9) but it is not installable
 Depends: libmpfr4 (>=3.1.3) but it is not installable
 Depends: libopencsg1  but it is not installable
 Depends: libqt5concurrent5 (>=5.0.2) but it is not installable
 Depends: libqt5core5a (>=5.7.0) but it is not installable
 Depends: libqt5dbus5 (>=5.0.2) but it is not installable
 Depends: libqt5gui5 (>=5.7.0) but it is not installable
 Depends: libqt5multimedia5 (>=5.6.0~beta) but it is not installable
 Depends: libqt5network5 (>=5.0.2) but it is not installable
 Depends: libqt5printsupport5 (>=5.0.2) but it is not installable
 Depends: libqt5scintilla2-12v5 (>=2.8.4) but it is not installable
 Depends: libqt5widgets5 (>=5.4.0) but it is not installable
 Depends: libstdc++6 (>=5.2) but it is not installable
 Depends: libx11-6  but it is not installable
 Depends: libxml2 (>=2.7.4) but it is not installable





-----
Admin - email* me if you need anything, or if I've done something stupid...

* click on my MichaelAtOz label, there is a link to email me.

Unless specifically shown otherwise above, my contribution is in the Public Domain; to the extent possible under law, I have waived all copyright and related or neighbouring rights to this work. Obviously inclusion of works of previous authors is not included in the above.

The TPP is no simple “trade agreement.”   Fight it! http://www.ourfairdeal.org/   time is running out!
--
Sent from: http://forum.openscad.org/

_______________________________________________
OpenSCAD mailing list
[hidden email]
http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org
Admin - email* me if you need anything,
or if I've done something stupid...
* click on my MichaelAtOz label, there is a link to email me.

Unless specifically shown otherwise above, my contribution is in the Public Domain; to the extent possible under law, I have waived all copyright and related or neighbouring rights to this work.
Obviously inclusion of works of previous authors is not included in the above.


The TPP is no simple “trade agreement.” Fight it! http://www.ourfairdeal.org/ time is running out!
Reply | Threaded
Open this post in threaded view
|

Re: OpenSCAD on Debian

MichaelAtOz
Administrator
Reformatted

openscad-nightly:arm64:                                                        
Installed version
 Depends: libboost-filesystem1.62.0  but it is not installable          
1.62.0+dfsg-4
 Depends: libboost-program-options1.62.0  but it is not installable   "
 Depends: libboost-regex1.62.0  but it is not installable                 "
 Depends: libboost-system1.62.0  but it is not installable               "
 Depends: libboost-thread1.62.0  but it is not installable                "
 Depends: libc6 (>=2.17) but it is not installable                        
2.24-11-deb94
 Depends: libcgal12  but it is not installable                              
4.9-1+b2



-----
Admin - email* me if you need anything, or if I've done something stupid...

* click on my MichaelAtOz label, there is a link to email me.

Unless specifically shown otherwise above, my contribution is in the Public Domain; to the extent possible under law, I have waived all copyright and related or neighbouring rights to this work. Obviously inclusion of works of previous authors is not included in the above.

The TPP is no simple “trade agreement.”   Fight it! http://www.ourfairdeal.org/   time is running out!
--
Sent from: http://forum.openscad.org/

_______________________________________________
OpenSCAD mailing list
[hidden email]
http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org
Admin - email* me if you need anything,
or if I've done something stupid...
* click on my MichaelAtOz label, there is a link to email me.

Unless specifically shown otherwise above, my contribution is in the Public Domain; to the extent possible under law, I have waived all copyright and related or neighbouring rights to this work.
Obviously inclusion of works of previous authors is not included in the above.


The TPP is no simple “trade agreement.” Fight it! http://www.ourfairdeal.org/ time is running out!
tp3
Reply | Threaded
Open this post in threaded view
|

Re: OpenSCAD on Debian

tp3
On 16.07.19 02:24, MichaelAtOz wrote:
>  Depends: libboost-regex1.62.0  but it is not installable                 "

That seems old, so maybe you picked a version that is not
matching the Debian release?

Which Debian version is that?

  cat /etc/os-release

And which of the repos did you give as apt source?

  apt-cache policy openscad-nightly

ciao,
  Torsten.

_______________________________________________
OpenSCAD mailing list
[hidden email]
http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org
-- Torsten
Reply | Threaded
Open this post in threaded view
|

Re: OpenSCAD on Debian

MichaelAtOz
Administrator
tp3 wrote
> On 16.07.19 02:24, MichaelAtOz wrote:
>>  Depends: libboost-regex1.62.0  but it is not installable                
>> "
>
> That seems old,

Nabble keeps stuffing up the format. The " ditto means they are the same as
above.

Am I right that 'Depends: libboost-regex1.62.0' means it wants that version?
Because all those libboost-* are installed with version 1.62.0+dfsg-4.

And 'Depends: libc6 (>=2.17) but it is not installable' is installed v
2.24-11-deb94.

> maybe you picked a version that is not matching the Debian release?

Debian Stretch was installed from a dvd.iso downloaded a few months ago.


mebd@mebd:~$ cat /etc/os-release

PRETTY_NAME="Debian GNU/Linux 9 (stretch)"
NAME="Debian GNU/Linux"
VERSION_ID="9"
VERSION="9 (stretch)"
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"

mebd@mebd:~$ apt-cache policy openscad-nightly
openscad-nightly:
  Installed: (none)
  Candidate: 20190715T105013.git6cc7e911f+3106.1
  Version table:
     20190715T105013.git6cc7e911f+3106.1 500
        500
https://download.opensuse.org/repositories/home:/t-paul/Debian_9.0 ./
Packages

mebd@mebd:~$ cat /etc/apt/sources.list.d/openscad.list

deb https://download.opensuse.org/repositories/home:/t-paul/Debian_9.0/ ./





-----
Admin - email* me if you need anything, or if I've done something stupid...

* click on my MichaelAtOz label, there is a link to email me.

Unless specifically shown otherwise above, my contribution is in the Public Domain; to the extent possible under law, I have waived all copyright and related or neighbouring rights to this work. Obviously inclusion of works of previous authors is not included in the above.

The TPP is no simple “trade agreement.”   Fight it! http://www.ourfairdeal.org/   time is running out!
--
Sent from: http://forum.openscad.org/

_______________________________________________
OpenSCAD mailing list
[hidden email]
http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org
Admin - email* me if you need anything,
or if I've done something stupid...
* click on my MichaelAtOz label, there is a link to email me.

Unless specifically shown otherwise above, my contribution is in the Public Domain; to the extent possible under law, I have waived all copyright and related or neighbouring rights to this work.
Obviously inclusion of works of previous authors is not included in the above.


The TPP is no simple “trade agreement.” Fight it! http://www.ourfairdeal.org/ time is running out!
12