Linux package

classic Classic list List threaded Threaded
29 messages Options
12
Reply | Threaded
Open this post in threaded view
|

Linux package

Brad Pitcher
Hi folks,

As promised I packaged up a snapshot for Linux built from the latest code. Please try it and report here if it works or not. I tested it by installing to my home directory, and it worked fine. I packaged this up using the scripts/release-linux.sh script from the openscad repository. It bundles *.so files with the package, which I think is a good solution to the library issues recently discussed.

Get it here:
https://github.com/downloads/brad/openscad/openscad-2012.02.01.linux32.tar.gz

Cheers,
Brad
Reply | Threaded
Open this post in threaded view
|

Re: Linux package

Ethan Dicks
On Wed, Feb 1, 2012 at 12:43 PM, Brad Pitcher <[hidden email]> wrote:
> Hi folks,
>
> As promised I packaged up a snapshot for Linux built from the latest code.

Thank you.

> Please try it and report here if it works or not.
> Get it here:
> https://github.com/downloads/brad/openscad/openscad-2012.02.01.linux32.tar.gz

Unfortunately, my Ubuntu laptop is running 64-bit...

$ uname -a
Linux opus 2.6.38-13-generic #54-Ubuntu SMP Tue Jan 3 13:38:12 UTC
2012 x86_64 x86_64 x86_64 GNU/Linux

$ /usr/local/bin/openscad
/usr/local/bin/../lib/openscad//openscad: error while loading shared
libraries: libicuuc.so.44: wrong ELF class: ELFCLASS64

Reply | Threaded
Open this post in threaded view
|

Re: Linux package

Mark Hornby
In reply to this post by Brad Pitcher
Hi, a slightly different error message here
Linux laptopUBUNTU 2.6.32-38-generic #83-Ubuntu SMP Wed Jan 4 11:13:04
UTC 2012 i686 GNU/Linux
"error while loading shared libraries: libicuuc.so.44: cannot open
shared object file: No such file or directory"

Thanks for putting it all together

Mark

On Thu, Feb 2, 2012 at 6:43 AM, Brad Pitcher <[hidden email]> wrote:

> Hi folks,
>
> As promised I packaged up a snapshot for Linux built from the latest code.
> Please try it and report here if it works or not. I tested it by installing
> to my home directory, and it worked fine. I packaged this up using the
> scripts/release-linux.sh script from the openscad repository. It bundles
> *.so files with the package, which I think is a good solution to the library
> issues recently discussed.
>
> Get it here:
> https://github.com/downloads/brad/openscad/openscad-2012.02.01.linux32.tar.gz
>
> Cheers,
> Brad
>
> _______________________________________________
> OpenSCAD mailing list
> [hidden email]
> http://rocklinux.net/mailman/listinfo/openscad
>

Reply | Threaded
Open this post in threaded view
|

Re: Linux package

Brad Pitcher
Hi, a slightly different error message here
Linux laptopUBUNTU 2.6.32-38-generic #83-Ubuntu SMP Wed Jan 4 11:13:04
UTC 2012 i686 GNU/Linux
"error while loading shared libraries: libicuuc.so.44: cannot open
shared object file: No such file or directory"

Can you try installing libicu-dev from your package manager? I wonder if this is another one that should be added to the package.
I guess this is only for 32-bit machines at the moment. I'll work on a 64-bit version.
Reply | Threaded
Open this post in threaded view
|

Re: Linux package

Michael Ambrus
Same issue here (32-bit Ubuntu 10.04, installation of libicuuc incl.
dev package double checked)

$ openscad
/usr/local/bin/../lib/openscad//openscad: error while loading shared
libraries: libicuuc.so.44: cannot open shared object file: No such
file or directory
$ ls -al /usr/lib/libicuuc.so.42
lrwxrwxrwx 1 root root 16 2012-02-01 20:10 /usr/lib/libicuuc.so.42 ->
libicuuc.so.42.1
$ cat /proc/version
Linux version 3.0.8 (mambrus@mambrus-laptop) (gcc version 4.4.3
(Ubuntu 4.4.3-4ubuntu5) ) #2 SMP Sat Nov 5 19:57:12 CET 2011
$ sudo ldconfig -v | grep libicuuc
/sbin/ldconfig.real: Can't stat /lib/i486-linux-gnu: No such file or directory
        libicuuc.so.42 -> libicuuc.so.42.1



On Wed, Feb 1, 2012 at 7:47 PM, Brad Pitcher <[hidden email]> wrote:

>> Hi, a slightly different error message here
>> Linux laptopUBUNTU 2.6.32-38-generic #83-Ubuntu SMP Wed Jan 4 11:13:04
>> UTC 2012 i686 GNU/Linux
>> "error while loading shared libraries: libicuuc.so.44: cannot open
>> shared object file: No such file or directory"
>
>
> Can you try installing libicu-dev from your package manager? I wonder if
> this is another one that should be added to the package.
> I guess this is only for 32-bit machines at the moment. I'll work on a
> 64-bit version.
>
> _______________________________________________
> OpenSCAD mailing list
> [hidden email]
> http://rocklinux.net/mailman/listinfo/openscad
>

Reply | Threaded
Open this post in threaded view
|

Re: Linux package

Brad Pitcher
OK, I packaged up a new version with libicu included. I hope that helps:

https://github.com/downloads/brad/openscad/openscad-2012.02.01-2.linux32.tar.gz


On Wed, Feb 1, 2012 at 11:38 AM, Michael Ambrus <[hidden email]> wrote:
Same issue here (32-bit Ubuntu 10.04, installation of libicuuc incl.
dev package double checked)

$ openscad
/usr/local/bin/../lib/openscad//openscad: error while loading shared
libraries: libicuuc.so.44: cannot open shared object file: No such
file or directory
$ ls -al /usr/lib/libicuuc.so.42
lrwxrwxrwx 1 root root 16 <a href="tel:2012-02-01%2020" value="+12012020120">2012-02-01 20:10 /usr/lib/libicuuc.so.42 ->
libicuuc.so.42.1
$ cat /proc/version
Linux version 3.0.8 (mambrus@mambrus-laptop) (gcc version 4.4.3
(Ubuntu 4.4.3-4ubuntu5) ) #2 SMP Sat Nov 5 19:57:12 CET 2011
$ sudo ldconfig -v | grep libicuuc
/sbin/ldconfig.real: Can't stat /lib/i486-linux-gnu: No such file or directory
       libicuuc.so.42 -> libicuuc.so.42.1



On Wed, Feb 1, 2012 at 7:47 PM, Brad Pitcher <[hidden email]> wrote:
>> Hi, a slightly different error message here
>> Linux laptopUBUNTU 2.6.32-38-generic #83-Ubuntu SMP Wed Jan 4 11:13:04
>> UTC 2012 i686 GNU/Linux
>> "error while loading shared libraries: libicuuc.so.44: cannot open
>> shared object file: No such file or directory"
>
>
> Can you try installing libicu-dev from your package manager? I wonder if
> this is another one that should be added to the package.
> I guess this is only for 32-bit machines at the moment. I'll work on a
> 64-bit version.
>
> _______________________________________________
> OpenSCAD mailing list
> [hidden email]
> http://rocklinux.net/mailman/listinfo/openscad
>
_______________________________________________
OpenSCAD mailing list
[hidden email]
http://rocklinux.net/mailman/listinfo/openscad

Reply | Threaded
Open this post in threaded view
|

Re: Linux package

Michael Ambrus
New error but on the same library.

$ openscad
/usr/local/bin/../lib/openscad//openscad: error while loading shared
libraries: libicui18n.so.44: cannot open shared object file: No such
file or directory
$ apt-file search libicui18n
libicu-dev: /usr/lib/libicui18n.so
libicu42: /usr/lib/libicui18n.so.42
libicu42: /usr/lib/libicui18n.so.42.1
libicu42-dbg: /usr/lib/debug/usr/lib/libicui18n.so.42.1
$ apt-file search libicuuc
libicu-dev: /usr/lib/libicuuc.so
libicu42: /usr/lib/libicuuc.so.42
libicu42: /usr/lib/libicuuc.so.42.1
libicu42-dbg: /usr/lib/debug/usr/lib/libicuuc.so.42.1
$



On Wed, Feb 1, 2012 at 9:26 PM, Brad Pitcher <[hidden email]> wrote:

> OK, I packaged up a new version with libicu included. I hope that helps:
>
> https://github.com/downloads/brad/openscad/openscad-2012.02.01-2.linux32.tar.gz
>
>
>
> On Wed, Feb 1, 2012 at 11:38 AM, Michael Ambrus <[hidden email]> wrote:
>>
>> Same issue here (32-bit Ubuntu 10.04, installation of libicuuc incl.
>> dev package double checked)
>>
>> $ openscad
>> /usr/local/bin/../lib/openscad//openscad: error while loading shared
>> libraries: libicuuc.so.44: cannot open shared object file: No such
>> file or directory
>> $ ls -al /usr/lib/libicuuc.so.42
>> lrwxrwxrwx 1 root root 16 2012-02-01 20:10 /usr/lib/libicuuc.so.42 ->
>> libicuuc.so.42.1
>> $ cat /proc/version
>> Linux version 3.0.8 (mambrus@mambrus-laptop) (gcc version 4.4.3
>> (Ubuntu 4.4.3-4ubuntu5) ) #2 SMP Sat Nov 5 19:57:12 CET 2011
>> $ sudo ldconfig -v | grep libicuuc
>> /sbin/ldconfig.real: Can't stat /lib/i486-linux-gnu: No such file or
>> directory
>>        libicuuc.so.42 -> libicuuc.so.42.1
>>
>>
>>
>> On Wed, Feb 1, 2012 at 7:47 PM, Brad Pitcher <[hidden email]>
>> wrote:
>> >> Hi, a slightly different error message here
>> >> Linux laptopUBUNTU 2.6.32-38-generic #83-Ubuntu SMP Wed Jan 4 11:13:04
>> >> UTC 2012 i686 GNU/Linux
>> >> "error while loading shared libraries: libicuuc.so.44: cannot open
>> >> shared object file: No such file or directory"
>> >
>> >
>> > Can you try installing libicu-dev from your package manager? I wonder if
>> > this is another one that should be added to the package.
>> > I guess this is only for 32-bit machines at the moment. I'll work on a
>> > 64-bit version.
>> >
>> > _______________________________________________
>> > OpenSCAD mailing list
>> > [hidden email]
>> > http://rocklinux.net/mailman/listinfo/openscad
>> >
>> _______________________________________________
>> OpenSCAD mailing list
>> [hidden email]
>> http://rocklinux.net/mailman/listinfo/openscad
>
>
>
> _______________________________________________
> OpenSCAD mailing list
> [hidden email]
> http://rocklinux.net/mailman/listinfo/openscad
>

Reply | Threaded
Open this post in threaded view
|

Re: Linux package

Mark Hornby
Will also need libicudata.so.44?

On Thu, Feb 2, 2012 at 9:41 AM, Michael Ambrus <[hidden email]> wrote:

> New error but on the same library.
>
> $ openscad
> /usr/local/bin/../lib/openscad//openscad: error while loading shared
> libraries: libicui18n.so.44: cannot open shared object file: No such
> file or directory
> $ apt-file search libicui18n
> libicu-dev: /usr/lib/libicui18n.so
> libicu42: /usr/lib/libicui18n.so.42
> libicu42: /usr/lib/libicui18n.so.42.1
> libicu42-dbg: /usr/lib/debug/usr/lib/libicui18n.so.42.1
> $ apt-file search libicuuc
> libicu-dev: /usr/lib/libicuuc.so
> libicu42: /usr/lib/libicuuc.so.42
> libicu42: /usr/lib/libicuuc.so.42.1
> libicu42-dbg: /usr/lib/debug/usr/lib/libicuuc.so.42.1
> $
>
>
>
> On Wed, Feb 1, 2012 at 9:26 PM, Brad Pitcher <[hidden email]> wrote:
>> OK, I packaged up a new version with libicu included. I hope that helps:
>>
>> https://github.com/downloads/brad/openscad/openscad-2012.02.01-2.linux32.tar.gz
>>
>>
>>
>> On Wed, Feb 1, 2012 at 11:38 AM, Michael Ambrus <[hidden email]> wrote:
>>>
>>> Same issue here (32-bit Ubuntu 10.04, installation of libicuuc incl.
>>> dev package double checked)
>>>
>>> $ openscad
>>> /usr/local/bin/../lib/openscad//openscad: error while loading shared
>>> libraries: libicuuc.so.44: cannot open shared object file: No such
>>> file or directory
>>> $ ls -al /usr/lib/libicuuc.so.42
>>> lrwxrwxrwx 1 root root 16 2012-02-01 20:10 /usr/lib/libicuuc.so.42 ->
>>> libicuuc.so.42.1
>>> $ cat /proc/version
>>> Linux version 3.0.8 (mambrus@mambrus-laptop) (gcc version 4.4.3
>>> (Ubuntu 4.4.3-4ubuntu5) ) #2 SMP Sat Nov 5 19:57:12 CET 2011
>>> $ sudo ldconfig -v | grep libicuuc
>>> /sbin/ldconfig.real: Can't stat /lib/i486-linux-gnu: No such file or
>>> directory
>>>        libicuuc.so.42 -> libicuuc.so.42.1
>>>
>>>
>>>
>>> On Wed, Feb 1, 2012 at 7:47 PM, Brad Pitcher <[hidden email]>
>>> wrote:
>>> >> Hi, a slightly different error message here
>>> >> Linux laptopUBUNTU 2.6.32-38-generic #83-Ubuntu SMP Wed Jan 4 11:13:04
>>> >> UTC 2012 i686 GNU/Linux
>>> >> "error while loading shared libraries: libicuuc.so.44: cannot open
>>> >> shared object file: No such file or directory"
>>> >
>>> >
>>> > Can you try installing libicu-dev from your package manager? I wonder if
>>> > this is another one that should be added to the package.
>>> > I guess this is only for 32-bit machines at the moment. I'll work on a
>>> > 64-bit version.
>>> >
>>> > _______________________________________________
>>> > OpenSCAD mailing list
>>> > [hidden email]
>>> > http://rocklinux.net/mailman/listinfo/openscad
>>> >
>>> _______________________________________________
>>> OpenSCAD mailing list
>>> [hidden email]
>>> http://rocklinux.net/mailman/listinfo/openscad
>>
>>
>>
>> _______________________________________________
>> OpenSCAD mailing list
>> [hidden email]
>> http://rocklinux.net/mailman/listinfo/openscad
>>
> _______________________________________________
> OpenSCAD mailing list
> [hidden email]
> http://rocklinux.net/mailman/listinfo/openscad

Reply | Threaded
Open this post in threaded view
|

Re: Linux package

Michael Ambrus
Should it not be possible to link against .so:s without explicitly
point out version?

Note:
libicui18n.so.44
libicui18n.so.42
                     ^^

Same thing with libicuuc.so

On Wed, Feb 1, 2012 at 9:44 PM, Mark <[hidden email]> wrote:

> Will also need libicudata.so.44?
>
> On Thu, Feb 2, 2012 at 9:41 AM, Michael Ambrus <[hidden email]> wrote:
>> New error but on the same library.
>>
>> $ openscad
>> /usr/local/bin/../lib/openscad//openscad: error while loading shared
>> libraries: libicui18n.so.44: cannot open shared object file: No such
>> file or directory
>> $ apt-file search libicui18n
>> libicu-dev: /usr/lib/libicui18n.so
>> libicu42: /usr/lib/libicui18n.so.42
>> libicu42: /usr/lib/libicui18n.so.42.1
>> libicu42-dbg: /usr/lib/debug/usr/lib/libicui18n.so.42.1
>> $ apt-file search libicuuc
>> libicu-dev: /usr/lib/libicuuc.so
>> libicu42: /usr/lib/libicuuc.so.42
>> libicu42: /usr/lib/libicuuc.so.42.1
>> libicu42-dbg: /usr/lib/debug/usr/lib/libicuuc.so.42.1
>> $
>>
>>
>>
>> On Wed, Feb 1, 2012 at 9:26 PM, Brad Pitcher <[hidden email]> wrote:
>>> OK, I packaged up a new version with libicu included. I hope that helps:
>>>
>>> https://github.com/downloads/brad/openscad/openscad-2012.02.01-2.linux32.tar.gz
>>>
>>>
>>>
>>> On Wed, Feb 1, 2012 at 11:38 AM, Michael Ambrus <[hidden email]> wrote:
>>>>
>>>> Same issue here (32-bit Ubuntu 10.04, installation of libicuuc incl.
>>>> dev package double checked)
>>>>
>>>> $ openscad
>>>> /usr/local/bin/../lib/openscad//openscad: error while loading shared
>>>> libraries: libicuuc.so.44: cannot open shared object file: No such
>>>> file or directory
>>>> $ ls -al /usr/lib/libicuuc.so.42
>>>> lrwxrwxrwx 1 root root 16 2012-02-01 20:10 /usr/lib/libicuuc.so.42 ->
>>>> libicuuc.so.42.1
>>>> $ cat /proc/version
>>>> Linux version 3.0.8 (mambrus@mambrus-laptop) (gcc version 4.4.3
>>>> (Ubuntu 4.4.3-4ubuntu5) ) #2 SMP Sat Nov 5 19:57:12 CET 2011
>>>> $ sudo ldconfig -v | grep libicuuc
>>>> /sbin/ldconfig.real: Can't stat /lib/i486-linux-gnu: No such file or
>>>> directory
>>>>        libicuuc.so.42 -> libicuuc.so.42.1
>>>>
>>>>
>>>>
>>>> On Wed, Feb 1, 2012 at 7:47 PM, Brad Pitcher <[hidden email]>
>>>> wrote:
>>>> >> Hi, a slightly different error message here
>>>> >> Linux laptopUBUNTU 2.6.32-38-generic #83-Ubuntu SMP Wed Jan 4 11:13:04
>>>> >> UTC 2012 i686 GNU/Linux
>>>> >> "error while loading shared libraries: libicuuc.so.44: cannot open
>>>> >> shared object file: No such file or directory"
>>>> >
>>>> >
>>>> > Can you try installing libicu-dev from your package manager? I wonder if
>>>> > this is another one that should be added to the package.
>>>> > I guess this is only for 32-bit machines at the moment. I'll work on a
>>>> > 64-bit version.
>>>> >
>>>> > _______________________________________________
>>>> > OpenSCAD mailing list
>>>> > [hidden email]
>>>> > http://rocklinux.net/mailman/listinfo/openscad
>>>> >
>>>> _______________________________________________
>>>> OpenSCAD mailing list
>>>> [hidden email]
>>>> http://rocklinux.net/mailman/listinfo/openscad
>>>
>>>
>>>
>>> _______________________________________________
>>> OpenSCAD mailing list
>>> [hidden email]
>>> http://rocklinux.net/mailman/listinfo/openscad
>>>
>> _______________________________________________
>> OpenSCAD mailing list
>> [hidden email]
>> http://rocklinux.net/mailman/listinfo/openscad
> _______________________________________________
> OpenSCAD mailing list
> [hidden email]
> http://rocklinux.net/mailman/listinfo/openscad

Reply | Threaded
Open this post in threaded view
|

Re: Linux package

Mark Hornby
Cludged icu issues, now getting:

/home/rob/OpenSCAD/bin/../lib/openscad//openscad:
/usr/lib/libstdc++.so.6: version `GLIBCXX_3.4.15' not found (required
by /home/rob/OpenSCAD/bin/../lib/openscad//openscad)
/home/rob/OpenSCAD/bin/../lib/openscad//openscad:
/usr/lib/libstdc++.so.6: version `GLIBCXX_3.4.15' not found (required
by /home/rob/OpenSCAD/bin/../lib/openscad/libboost_thread.so.1.46.1)
/home/rob/OpenSCAD/bin/../lib/openscad//openscad:
/usr/lib/libstdc++.so.6: version `GLIBCXX_3.4.15' not found (required
by /home/rob/OpenSCAD/bin/../lib/openscad/libboost_regex.so.1.46.1)

$ strings /usr/lib/libstdc++.so.6 | grep GLIBC
GLIBCXX_3.4
GLIBCXX_3.4.1
GLIBCXX_3.4.2
GLIBCXX_3.4.3
GLIBCXX_3.4.4
GLIBCXX_3.4.5
GLIBCXX_3.4.6
GLIBCXX_3.4.7
GLIBCXX_3.4.8
GLIBCXX_3.4.9
GLIBCXX_3.4.10
GLIBCXX_3.4.11
GLIBCXX_3.4.12
GLIBCXX_3.4.13
GLIBC_2.0
GLIBC_2.3
GLIBC_2.4
GLIBC_2.1
GLIBC_2.3.4
GLIBC_2.1.3
GLIBC_2.3.2
GLIBC_2.2
GLIBCXX_FORCE_NEW
GLIBCXX_DEBUG_MESSAGE_LENGTH

Reply | Threaded
Open this post in threaded view
|

Re: Linux package

Brad Pitcher
OK, I think this is turning into a goose chase. It's becoming apparent that there is something fundamentally wrong with the way these packages are made. I need to investigate and do more personal testing.

On Wed, Feb 1, 2012 at 1:07 PM, Mark <[hidden email]> wrote:
Cludged icu issues, now getting:

/home/rob/OpenSCAD/bin/../lib/openscad//openscad:
/usr/lib/libstdc++.so.6: version `GLIBCXX_3.4.15' not found (required
by /home/rob/OpenSCAD/bin/../lib/openscad//openscad)
/home/rob/OpenSCAD/bin/../lib/openscad//openscad:
/usr/lib/libstdc++.so.6: version `GLIBCXX_3.4.15' not found (required
by /home/rob/OpenSCAD/bin/../lib/openscad/libboost_thread.so.1.46.1)
/home/rob/OpenSCAD/bin/../lib/openscad//openscad:
/usr/lib/libstdc++.so.6: version `GLIBCXX_3.4.15' not found (required
by /home/rob/OpenSCAD/bin/../lib/openscad/libboost_regex.so.1.46.1)

$ strings /usr/lib/libstdc++.so.6 | grep GLIBC
GLIBCXX_3.4
GLIBCXX_3.4.1
GLIBCXX_3.4.2
GLIBCXX_3.4.3
GLIBCXX_3.4.4
GLIBCXX_3.4.5
GLIBCXX_3.4.6
GLIBCXX_3.4.7
GLIBCXX_3.4.8
GLIBCXX_3.4.9
GLIBCXX_3.4.10
GLIBCXX_3.4.11
GLIBCXX_3.4.12
GLIBCXX_3.4.13
GLIBC_2.0
GLIBC_2.3
GLIBC_2.4
GLIBC_2.1
GLIBC_2.3.4
GLIBC_2.1.3
GLIBC_2.3.2
GLIBC_2.2
GLIBCXX_FORCE_NEW
GLIBCXX_DEBUG_MESSAGE_LENGTH
_______________________________________________
OpenSCAD mailing list
[hidden email]
http://rocklinux.net/mailman/listinfo/openscad

Reply | Threaded
Open this post in threaded view
|

Re: Linux package

Mark Hornby
Thanks for doing the hard work

On Thu, Feb 2, 2012 at 10:10 AM, Brad Pitcher <[hidden email]> wrote:

> OK, I think this is turning into a goose chase. It's becoming apparent that
> there is something fundamentally wrong with the way these packages are made.
> I need to investigate and do more personal testing.
>
> On Wed, Feb 1, 2012 at 1:07 PM, Mark <[hidden email]> wrote:
>>
>> Cludged icu issues, now getting:
>>
>> /home/rob/OpenSCAD/bin/../lib/openscad//openscad:
>> /usr/lib/libstdc++.so.6: version `GLIBCXX_3.4.15' not found (required
>> by /home/rob/OpenSCAD/bin/../lib/openscad//openscad)
>> /home/rob/OpenSCAD/bin/../lib/openscad//openscad:
>> /usr/lib/libstdc++.so.6: version `GLIBCXX_3.4.15' not found (required
>> by /home/rob/OpenSCAD/bin/../lib/openscad/libboost_thread.so.1.46.1)
>> /home/rob/OpenSCAD/bin/../lib/openscad//openscad:
>> /usr/lib/libstdc++.so.6: version `GLIBCXX_3.4.15' not found (required
>> by /home/rob/OpenSCAD/bin/../lib/openscad/libboost_regex.so.1.46.1)
>>
>> $ strings /usr/lib/libstdc++.so.6 | grep GLIBC
>> GLIBCXX_3.4
>> GLIBCXX_3.4.1
>> GLIBCXX_3.4.2
>> GLIBCXX_3.4.3
>> GLIBCXX_3.4.4
>> GLIBCXX_3.4.5
>> GLIBCXX_3.4.6
>> GLIBCXX_3.4.7
>> GLIBCXX_3.4.8
>> GLIBCXX_3.4.9
>> GLIBCXX_3.4.10
>> GLIBCXX_3.4.11
>> GLIBCXX_3.4.12
>> GLIBCXX_3.4.13
>> GLIBC_2.0
>> GLIBC_2.3
>> GLIBC_2.4
>> GLIBC_2.1
>> GLIBC_2.3.4
>> GLIBC_2.1.3
>> GLIBC_2.3.2
>> GLIBC_2.2
>> GLIBCXX_FORCE_NEW
>> GLIBCXX_DEBUG_MESSAGE_LENGTH
>> _______________________________________________
>> OpenSCAD mailing list
>> [hidden email]
>> http://rocklinux.net/mailman/listinfo/openscad
>
>
>
> _______________________________________________
> OpenSCAD mailing list
> [hidden email]
> http://rocklinux.net/mailman/listinfo/openscad
>

Reply | Threaded
Open this post in threaded view
|

Re: Linux package

Brad Pitcher
Thanks for doing the hard work

No problem. I knew I never should have expected the release script to work right off the bat especially with this comment in the source:

# WARNING: This script might only work with the authors setup...

lol
Reply | Threaded
Open this post in threaded view
|

Re: Linux package

Ethan Dicks
On Wed, Feb 1, 2012 at 4:29 PM, Brad Pitcher <[hidden email]> wrote:
>> Thanks for doing the hard work

Double that!

> No problem. I knew I never should have expected the release script to work
> right off the bat especially with this comment in the source:
>
> # WARNING: This script might only work with the authors setup...

Heh... Here Be Dragons!

-ethan

Reply | Threaded
Open this post in threaded view
|

Re: Linux package

Michael Ambrus


Den 1 feb 2012 22:32 skrev "Ethan Dicks" <[hidden email]>:
>
> On Wed, Feb 1, 2012 at 4:29 PM, Brad Pitcher <[hidden email]> wrote:
> >> Thanks for doing the hard work
>
> Double that!

Definitly.

Good job. Post your findings also when you've suceeded.

Reply | Threaded
Open this post in threaded view
|

Re: Linux package

kintel
Administrator
In reply to this post by Ethan Dicks
Hi,

For the Mac binaries, I wrote a script checking all linked libraries making sure they are present,  built with the correct compatibility settings and don't depend on non-system libraries which are not packaged. Perhaps something similar would make sense for other platforms as well:

https://github.com/kintel/MacOSX-tools/blob/master/macosx-sanity-check.py

 -Marius


Reply | Threaded
Open this post in threaded view
|

Re: Linux package

Mark Hornby
libicu44 and  libstdc++.so.6.0.16 come with Ubuntu 11.10 (Oneiric Ocelot)

For Ubuntu 10.04 (Lucid Lynx) you can get the package from here:

http://packages.ubuntu.com/oneiric/libicu44

For 'GLIBCXX_3.4.15' errors, libstdc++.so.6.0.16 is in this package:

http://packages.ubuntu.com/oneiric/libstdc++6

On Thu, Feb 2, 2012 at 11:32 AM, Marius Kintel <[hidden email]> wrote:

> Hi,
>
> For the Mac binaries, I wrote a script checking all linked libraries making sure they are present,  built with the correct compatibility settings and don't depend on non-system libraries which are not packaged. Perhaps something similar would make sense for other platforms as well:
>
> https://github.com/kintel/MacOSX-tools/blob/master/macosx-sanity-check.py
>
>  -Marius
>
> _______________________________________________
> OpenSCAD mailing list
> [hidden email]
> http://rocklinux.net/mailman/listinfo/openscad

Reply | Threaded
Open this post in threaded view
|

Re: Linux package

Brad Pitcher
In reply to this post by Michael Ambrus
Thanks guys. Maybe it's not a completely wild goose chase. I added a few more dependencies. It's a bit bigger now, but I think this might cover most cases:

https://github.com/downloads/brad/openscad/openscad-2012.02.01-3.linux32.tar.gz

On Wed, Feb 1, 2012 at 1:51 PM, Michael Ambrus <[hidden email]> wrote:


Den 1 feb 2012 22:32 skrev "Ethan Dicks" <[hidden email]>:


>
> On Wed, Feb 1, 2012 at 4:29 PM, Brad Pitcher <[hidden email]> wrote:
> >> Thanks for doing the hard work
>
> Double that!

Definitly.

Good job. Post your findings also when you've suceeded.


_______________________________________________
OpenSCAD mailing list
[hidden email]
http://rocklinux.net/mailman/listinfo/openscad


Reply | Threaded
Open this post in threaded view
|

Re: Linux package

Brad Pitcher
In reply to this post by Ethan Dicks
Unfortunately, my Ubuntu laptop is running 64-bit...


Ethan, please try this snapshot and let me know how it works:

Reply | Threaded
Open this post in threaded view
|

Re: Linux package

Ethan Dicks
On Thu, Feb 2, 2012 at 7:28 PM, Brad Pitcher <[hidden email]> wrote:
>> Unfortunately, my Ubuntu laptop is running 64-bit...
>>
>
> Ethan, please try this snapshot and let me know how it works:
>
> https://github.com/downloads/brad/openscad/openscad-2012-02.02.linux64.tar.gz

Loads and runs (and compiles a script I've used before) on my 64-bit
Ubuntu 11.04 laptop with crappy Intel graphics.  Thanks!

Now to play with hulls!

-ethan

12