Creating bell like curve to print

classic Classic list List threaded Threaded
7 messages Options
Reply | Threaded
Open this post in threaded view
|

Creating bell like curve to print

terramir

I got this coffee machine that is missing the insert the cup stands on, just curious if I get a few measurements and a photo any peeps here willing to help design this? I am half way across the USA right now but taking some down time b4 driving back, figure I feel out the interest. Probably be back home Sunday.
terramir


_______________________________________________
OpenSCAD mailing list
[hidden email]
http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org
Reply | Threaded
Open this post in threaded view
|

Re: Creating bell like curve to print

Ronaldo
May be a good test of my modeling skills and Bezier library. I am in.

2016-10-11 18:53 GMT-03:00 r.d. terramir <[hidden email]>:

I got this coffee machine that is missing the insert the cup stands on, just curious if I get a few measurements and a photo any peeps here willing to help design this? I am half way across the USA right now but taking some down time b4 driving back, figure I feel out the interest. Probably be back home Sunday.
terramir


_______________________________________________
OpenSCAD mailing list
[hidden email]
http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org



_______________________________________________
OpenSCAD mailing list
[hidden email]
http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org
Reply | Threaded
Open this post in threaded view
|

Re: Creating bell like curve to print

jdawgaz
only if we can have a lesson is bezier curves library as well. thanks.


--
Extra Ham Operator: K7AZJ
Registered Linux User: 275424
Raspberry Pi and Openscad developer

The most exciting phrase to hear in science - the one that heralds new discoveries - is not "Eureka!" but "That's funny...".
- Isaac. Asimov


On Tue, Oct 11, 2016 at 5:42 PM, Ronaldo Persiano <[hidden email]> wrote:
May be a good test of my modeling skills and Bezier library. I am in.

2016-10-11 18:53 GMT-03:00 r.d. terramir <[hidden email]>:

I got this coffee machine that is missing the insert the cup stands on, just curious if I get a few measurements and a photo any peeps here willing to help design this? I am half way across the USA right now but taking some down time b4 driving back, figure I feel out the interest. Probably be back home Sunday.
terramir


_______________________________________________
OpenSCAD mailing list
[hidden email]
http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org



_______________________________________________
OpenSCAD mailing list
[hidden email]
http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org



_______________________________________________
OpenSCAD mailing list
[hidden email]
http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org
Reply | Threaded
Open this post in threaded view
|

Re: Creating bell like curve to print

cacb
In reply to this post by terramir
On 11. okt. 2016 23:53, r.d. terramir wrote:
> I got this coffee machine that is missing the insert the cup stands on,
> just curious if I get a few measurements and a photo any peeps here
> willing to help design this? I am half way across the USA right now but
> taking some down time b4 driving back, figure I feel out the interest.
> Probably be back home Sunday.
> terramir

If you provide measurements + some decent photos you may perhaps see
several design suggestions from various people. Such projects are nice
exercises.

Carsten Arnholm


_______________________________________________
OpenSCAD mailing list
[hidden email]
http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org
Reply | Threaded
Open this post in threaded view
|

Re: Creating bell like curve to print

Ronaldo
In reply to this post by jdawgaz
jdawgaz wrote
only if we can have a lesson is bezier curves library as well. thanks.
My Bezier library is under construction. As soon as I stop to include more and more functions and conclude the tests I will publish it. And I will be pleased to give instructions and make demos on its use. For the application of this thread, I would provided the code of the necessary library functions.
Reply | Threaded
Open this post in threaded view
|

Re: Creating bell like curve to print

jdawgaz
ok. great. I am looking forward to it.
So many libraries out there that don't have any instructions, it is hard to figure out how to use.




--
Extra Ham Operator: K7AZJ
Registered Linux User: 275424
Raspberry Pi and Openscad developer

The most exciting phrase to hear in science - the one that heralds new discoveries - is not "Eureka!" but "That's funny...".
- Isaac. Asimov


On Wed, Oct 12, 2016 at 1:00 PM, Ronaldo <[hidden email]> wrote:
jdawgaz wrote
> only if we can have a lesson is bezier curves library as well. thanks.

My Bezier library is under construction. As soon as I stop to include more
and more functions and conclude the tests I will publish it. And I will be
pleased to give instructions and make demos on its use. For the application
of this thread, I would provided the code of the necessary library
functions.



--
View this message in context: http://forum.openscad.org/Creating-bell-like-curve-to-print-tp18673p18677.html
Sent from the OpenSCAD mailing list archive at Nabble.com.

_______________________________________________
OpenSCAD mailing list
[hidden email]
http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org


_______________________________________________
OpenSCAD mailing list
[hidden email]
http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org
Reply | Threaded
Open this post in threaded view
|

Re: Creating bell like curve to print

MichaelAtOz
Administrator
In reply to this post by terramir
r.d. terramir wrote
if I get a few measurements and a photo
If you can find some, I find it helps a lot to have the part on graph paper for photos from above.
Admin - email* me if you need anything,
or if I've done something stupid...
* click on my MichaelAtOz label, there is a link to email me.

Unless specifically shown otherwise above, my contribution is in the Public Domain; to the extent possible under law, I have waived all copyright and related or neighbouring rights to this work.
Obviously inclusion of works of previous authors is not included in the above.


The TPP is no simple “trade agreement.” Fight it! http://www.ourfairdeal.org/ time is running out!